AD6080 Acrylic Spray - 80: Grass Green - Matt - 150ml
Product Info
Humbrol Acrylic Spray No. 80 Grass Green is a Matt, solvent-based aerosol in a 150ml can. It was developed for plastic model kits and resin models, but works on many other substrates. The aerosol lays down an even Matt coat across large panels and scenic areas where a brush can leave streaks. Humbrol has been the modeller's standard for decades.
Key Features
- No. 80 Grass Green in a Matt finish, suited to scenic groundwork and vegetation
- 150ml aerosol, one can per pack
- Fast-drying Acrylic formula: touch-dry in 15 - 30 mins, hard-dry in 1 - 2 hours
- Two thin coats give full opacity with no brush marks
- Covers most plastics, resin, wood, glass, ceramics, metal, cardboard, sealed plaster and sealed hardboard
- Removable with Enamel Thinners before it dries, permanent once dry
Ideal For
- Base-coating plastic kits and dioramas in one session
- Scenic baseboards and terrain on model railways
- Uniform Matt panels on vehicle and figure models
How to Use
Remove any mould-release agent and apply a suitable primer first. Spray at least 25cm from the surface with an even back and forth motion; two thin coats are preferable to one thick coat. Warning: solvent-based aerosol, for ages 14+, and use only in a well-ventilated area.
What's Inside
Recommended For You
Tech Specs
- Product Volume in Millilitres (If applicable)
- Metal tins 150ml
- Finish
- Matt
EN | Danger | Contains acetone. Repeated exposure may cause skin dryness or cracking. Extremely flammable aerosol. Pressurised container: May burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Avoid breathing vapours. Wash hands thoroughly after handling. Use only outdoors or in a well-ventilated area. Wear protective gloves/eye protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/ doctor if you feel unwell. If eye irritation persists: Get medical advice/attention. Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122°F. Dispose of contents/container in accordance with local regulations.