AD6086 Acrylic Spray - 86: Olive Green - Matt - 150ml
Product Info
Humbrol No. 86 Olive Green is a Matt Acrylic spray paint in a 150ml aerosol. The solvent-based, fast-dry formula was developed for plastic model kits and resin models, and works on many other substrates. Humbrol has been the modeller's standard for decades, and this olive green sits in the heritage military palette. Satin, Gloss, Metallic and Metalcote finishes are also available.
Key Features
- Humbrol No. 86 Olive Green in a true Matt finish
- 150ml aerosol
- Solvent-based Acrylic formula, fast-dry on plastic and resin
- Touch dry in 15 - 30 mins; hard dry in 1 - 2 hours
- Two thin coats give even opacity and coverage across a kit
Ideal For
- Basecoating WWII and Cold War military vehicles, aircraft and ground equipment
- Wargaming miniatures and diorama pieces that need a quick basecoat
- Most plastics, resin, wood, glass, ceramics, metal, cardboard and sealed plaster
How to Use
Spray at least 25cm from the substrate using an even back and forth motion. Apply two thin coats, letting the first hard dry for 1 - 2 hours; wet paint can be removed with Enamel Thinners. Warning: use this solvent-based aerosol in a well-ventilated area, keep it away from children under 14 years, and note that paint is permanent once dry.
What's Inside
Recommended For You
Tech Specs
- Product Volume in Millilitres (If applicable)
- Metal tins 150ml
- Finish
- Matt
EN | Danger | Contains acetone. Repeated exposure may cause skin dryness or cracking. Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist. Extremely flammable aerosol. Pressurised container: May burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Use only outdoors or in a well-ventilated area. Wear protective gloves/eye protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF INHALED: Remove person to fresh air and keep comfortable for breathing. If eye irritation persists: Get medical advice/attention. Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122°F. Dispose of contents/container in accordance with local regulations.