AD6034 Acrylic Spray - 34: White - Matt - 150ml
Product Info
Humbrol No. 34 White is a Matt Acrylic spray, supplied as a 150ml aerosol. The solvent-based, fast-drying formula was developed for plastic model kits and resin models, and works on many other substrates. Humbrol has been the modeller's standard for decades, and the aerosol lays down white evenly where brush application can go patchy.
Key Features
- No. 34 White in a Matt finish, 1x 150ml aerosol
- Solvent-based Acrylic formula for plastic kits and resin models
- Touch dry in 15 - 30 mins; hard dry in 1 - 2 hours
- Uniform white opacity across broad panels in two thin coats
- Same shade also available as an 18.2ml tinlet and a 12ml airbrush bottle
- Satin, Gloss and Metallic finishes available across the range
Ideal For
- Base-coating large white areas on scale aircraft and ship models
- A foundation coat before pigment washes and weathering powders
- Most plastics, resin, wood, glass, ceramics, metal and cardboard
How to Use
Spray at least 25cm from the substrate with an even back and forth motion. Two thin coats are preferable to one thick coat, allowing the first coat to hard-dry before the second. Paint can be removed with Enamel Thinners while still wet; once dry it is permanent.
Warning: solvent-based aerosol. Spray in a well-ventilated area. Not suitable for children under 14 years.
What's Inside
Recommended For You
Tech Specs
- Product Volume in Millilitres (If applicable)
- Metal tins 150ml
- Finish
- Matt
EN | Danger | Contains acetone. Repeated exposure may cause skin dryness or cracking. Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist. Extremely flammable aerosol. Pressurised container: May burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Use only outdoors or in a well-ventilated area. Wear eye protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Call a POISON CENTER/ doctor if you feel unwell. If eye irritation persists: Get medical advice/attention. Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122°F. Dispose of contents/container in accordance with local regulations.