AD6033 Acrylic Spray: 33 - Black - Matt - (150ml)
Product Info
Matt, Satin, Gloss, Metallic and Clear finishes are available.
Substrate: A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster and sealed hardboard. Also most applications in general DIY and automotive. Always try on a small test area to check suitability.
Coverage: Depends on application and thickness of coats.
Application: Aerosol spray. Spray at least 25cm from the substrate and spray with an even back and forth action.
Drying Time: 15-30 minutes
How To Clean: Hold can upside down after use and depress nozzle for a few seconds to clean. Can be removed if not fully dry with Humbrol Acrylic Thinner. Product is permanent once dry.
What's Inside
Recommended For You
Tech Specs
- Product Volume in Millilitres (If applicable)
- Metal tins 150ml
- Finish
- Matt
EN | Danger | Contains acetone. Repeated exposure may cause skin dryness or cracking. Extremely flammable aerosol. Pressurised container: May burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Avoid breathing vapours. Wash hands thoroughly after handling. Use only outdoors or in a well-ventilated area. Wear eye protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Call a POISON CENTER/ doctor if you feel unwell. If eye irritation persists: Get medical advice/attention. Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122°F. Dispose of contents/container in accordance with local regulations.