AD6019 Acrylic Spray - 19: Bright Red - Gloss - 150ml
Product Info
Humbrol No. 19 Bright Red is a Gloss Acrylic spray paint in a 150ml aerosol. It is solvent-based and developed for plastic model kits and resin models, but works on many other substrates too. The aerosol lays down an even, fine coating that holds surface detail, which is hard to match with a brush in red shades. Matt, Satin, Metallic and Metalcote finishes are also available.
Key Features
- Gloss finish in Bright Red, Humbrol No. 19
- Supplied as 1x 150ml Aerosol
- Touch dry in 15 - 30 mins; hard dry in 1 - 2 hours
- Strong opacity in two thin coats, including over large panels
- Can be removed with Enamel Thinners before it fully dries; permanent once dry
- Age warning: +14 Years
Ideal For
- Plastic model kits and resin figures or diorama pieces
- Wood, glass, ceramics, metal, cardboard, sealed plaster and sealed hardboard
- Large uniform areas such as aircraft and vehicle exteriors
How to Use
Spray at least 25cm from the surface in an even back and forth motion. Two thin coats are preferable to one thick coat, allowing the first coat to hard dry (1 - 2 hours) before the second. Warning: solvent-based aerosol; use in a well-ventilated area away from naked flames.
What's Inside
Recommended For You
Tech Specs
- Product Volume in Millilitres (If applicable)
- Metal tins 150ml
- Finish
- Gloss
EN | Danger | Contains acetone. Repeated exposure may cause skin dryness or cracking. Extremely flammable aerosol. Pressurised container: May burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Avoid breathing vapours. Wash hands thoroughly after handling. Use only outdoors or in a well-ventilated area. Wear protective gloves/eye protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/ doctor if you feel unwell. If eye irritation persists: Get medical advice/attention. Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122°F. Dispose of contents/container in accordance with local regulations.