Humbrol Product Guide
Humbrol Enamel Paint
Usage
A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other substrates. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available.
Substrate
A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and many more.
Application
Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part Humbrol Enamel Thinner. Note that Metalcote colours are designed to be polished when fully dry.
Drying Time
Gloss: 1-2 hours. Matt & Satin: 20-40 mins touch dry, up to 24 hours for hard dry. Metallics: hard dry in approx. 10 days. Recoat: 6 hours minimum.
How To Clean
Humbrol Enamel Thinners when wet. Product is permanent once dry.
Humbrol Acrylic Paint
Usage
A water-based, fast dry paint developed for use on plastic model kits but which can also be used on other substrates. Matt, Satin, Gloss, Metallic and Clear finishes are available.
Substrate
A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and many more.
Application
Brush straight from the tin or Airbrush with a suitable thinner such as water. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to one part Humbrol Acrylic Thinner.
Drying Time
1-2 hours ‘hard dry’, allow longer for Gloss and Metallic finishes.
How To Clean
Acrylic Thinners or water when wet, cellulose when dry.
Humbrol Acrylic Spray
Usage
A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other substrates. Matt, Satin, Gloss, Metallic and Clear finishes are available.
Substrate
A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and many more.
Application
Spray at least 25cm from the substrate and spray with an even back and forth action.
Drying Time
15-30 minutes.
How To Clean
Can be removed if not fully dry with Humbrol Enamel Thinners. Product is permanent once dry.
Humbrol Varnish Spray
Usage
Protects and creates a desired finish: Matt, Satin & Gloss.
Substrate
Overcoat for the applicable paint type.
Application
Spray at least 25cm from the substrate and spray with an even back and forth action.
Drying Time
15-30 minutes.
Humbrol Fluorescent Spray
Usage
Creates instant visibility, idea for identification and safety as well as decorative and craft projects. Glows under UV light.
Substrate
A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and many more. A black base coat must be applied first.
Application
Spray at least 25cm from the substrate and spray with an even back and forth action.
Drying Time
15-30 minutes.
Humbrol Multi-Effect Spray
Usage
Creates a Two-Tone / Flip paint effect.
Substrate
A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and many more. A black base coat must be applied first.
Application
Spray at least 25cm from the substrate and spray with an even back and forth action.
Drying Time
15-30 minutes.
Humbrol Metal Cote Spray
Usage
Creates a polished look once dry and buffed.
Substrate
A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and many more.
Application
Spray at least 25cm from the substrate and spray with an even back and forth action. Once dry polish with a soft dry cloth.
Drying Time
30-60 minutes, for best results leave for 24 hours.
Humbrol Glass Etch
Usage
Used to transform mirrors, interior doors and windows. Used in conjunction with stencils, a wide range of designer effects can be created.
Substrate
Not suitable for areas prone to high condensation, steam, moisture or cold damp conditions.
Application
Spray at least 25cm from the substrate and spray with an even back and forth action.
Drying Time
Spray at least 25cm from the substrate and spray with an even back and forth action.
How to Clean
Can be removed if not fully dry with Humbrol Enamel Thinners. Product is permanent once dry.
In this video we show you the uses of the Humbrol Glass Etch Spray Range. We strongly suggest you practice the techniques using a test piece first.
Humbrol products used in this video:
Humbrol Glass Etch White 150ml - AD7700
Humbrol Glass Etch Pink 150ml - AD7701
Humbrol Glass Etch Blue 150ml - AD7702
Humbrol Glass Etch Green 150ml - AD7703
Humbrol Enamel Thinners 125ml - AC7430
Humbrol Workstation - AG9156
Humbrol A4 Cutting Mat - AG9155
Humbrol Masking Tape 10mm - AG6010
Humbrol Small Tool Set - AG9150
Humbrol Crystal Clear
Usage
Seals porous surfaces, finish will not yellow with age. Adds strength and water resistance - helps prevent tarnish and rust.
Substrate
Wood, metal, plastic, ceramic, fabric and paper.
Application
Spray at least 25cm from the substrate and spray with an even back and forth action. Spray additional coats to create a darker effect.
Drying Time
15-30 minutes.
Humbrol Weathering Powder
Usage
Used to create realistic weathered effects.
Substrate
Weathering Powder can be applied to most substrates depending on the method.
Application
Weathering Powder can be applied dry or mixed with several Humbrol products.
Drying Time
Dependent of application methods.
How to Clean
Dependent of application methods.
Humbrol Enamel Wash
Usage
Used to create realistic weathered, oiled and grime effects on scale models.
Substrate
Humbrol Enamel Washes can be applied to most substrates depending on the method.
Application
Brush straight from the jar. Thin with Humbrol Enamel Thinners.
Drying Time
10-20 minutes - Drying times may vary with additional Thinners.
How to Clean
Humbrol Enamel Thinners.
Humbrol Poly Cement
Usage
A solvent-based cement suitable for plastic model kits only.
Substrate
Common plastics used to manufacture model kits including polystyrene and ABS. The product works by melting the plastic on application and ‘welding’ two glued pieces of plastic together to form a strong bond.
Application
Directly onto plastic model kits. A cocktail stick can be useful to apply sparingly to small areas or fine details.
Drying Time
Surface dry in 10-20 minutes. Fully dry in 1 hour.
How to Clean
Can be removed if not fully dry by re-dissolving with Humbrol Liquid Poly or Precision Poly. Product is permanent once dry.
Humbrol Liquid Poly
Usage
A solvent-based cement suitable for plastic model kits only. The product is a low viscosity version of Humbrol Poly Cement to enable application by brush.
Substrate
Common plastics used to manufacture model kits including polystyrene and ABS. The product works by melting the plastic on application and 'welding' two glued pieces of plastic together to form a strong bond.
Coverage
Depends on thickness of application.
Application
Directly onto plastic model kits. An integral brush is supplied. A cocktail stick can be useful to apply sparingly to small areas or fine details.
Drying time
Surface dry in 10-20 minutes. Fully dry in 1 hour. Drying times will vary according to ambient temperature and humidity.
How to clean
Can be removed if not fully dry by re-dissolving with more Liquid Poly or Poly Cement. Permanent once dry.
In this video we show you how you should use Liquid Poly on your plastic kit to really get the best possible look and finish.
Humbrol products used in this video
AE2500 - Liquid Poly
AG4030 - Coloro Brush - Size 00
Humbrol Model Filler
Usage
Fills hairline cracks and gaps between plastic parts. The product can be sanded when fully dry using a fine grade of sandpaper and painted.
Substrate
Plastic model kits.
Application
Directly onto substrate without excessive application of product. If gaps are deep two thin coats are preferable to one thick coat.
Drying Time
Surface dry in 1-2 hours. Fully dry in 24 hours.
How to Clean
Wipe away using a damp cloth. Product is permanent once dry.
In this video we explain how to use Humbrol Model Filler and what can be acheieved.
Humbrol products used in this video
AE3016 - 31ml Humbrol Model Filler
AE2500 - 28ml Humbrol Liquid Poly
AD6001 - Humbrol Grey Primer No.1
Humbrol Balsa Cement
Usage
A quick-drying transparent cement for balsa, other soft woods and cork.
Substrate
Balsa, other soft woods and cork.
Application
Directly onto substrate.
Drying Time
20-30 minutes.
How to Clean
Wipe away using a damp cloth. Product is permanent once dry.
Humbrol ClearFix
Usage
A solvent-based polymer solution for use as an adhesive on clear plastic parts without the risk of the ‘frosting’ effect sometimes seen using traditional glues and for making small windows or translucent areas of 3mm or less.
Substrate
Common plastics used to manufacture model kits including polystyrene and ABS.
Application
A cocktail stick is usually the most practical means of application. Run a small drop of Clear fix around the edge of the window then draw across the opening to produce a thin membrane.
Drying Time
24 hours.
How to Clean
Wipe away using a damp cloth. Product is permanent once dry.
Humbrol DecalFix
Usage
A water-based solution for softening decals and securing them into position.
Substrate
Decals are usually applied onto painted surfaces. Care should be taken to avoid ‘silvering’ over matt paints.
Application
Brush on to decals or immerse them in Decal fix for approx. 45 seconds or until softened. Slide off using a brush and dab dry with tissue paper.
Drying Time
20-30 minutes. Do not force dry decals as they may crease or shrivel.
How To Clean
Excess product should be wiped away using a damp cloth.
In this video we explain how to use Humbrol Decalfix and what can be acheieved.
Humbrol products used in this video
Humbrol DecalFix 125ml - AC7432
Humbrol DecalFix 28ml - AC6134
Coloro Brush Pack - AG4050
Humbrol Workstation - AG9156
Humbrol A4 Cutting Mat - AG9155
Airfix Products
Supermarine Seafire F.XVII 1:48 - A06102
RAF Benevolent Fund BAE Hawk Gift Set 1:72 - A50149
Humbrol Maskol
Usage
A rubber solution that can be applied to surfaces to prevent them being painted. When the paint has dried the Maskol can be simply peeled off.
Substrate
Common plastics used to manufacture model kits including polystyrene and ABS and a wide variety of other applications including glass.
Application
Brush only. Apply to surface, allow to dry and paint over. When paint is dry peel off the Maskol.
Drying Time
15-20 minutes.
How to Clean
Wipe away using a damp cloth.
In this video we show you how you should use Maskol on your plastic kit to really get the best possible look and finish.
Humbrol products used in this video
Humbrol Maskol 28ml - AC5217
Flat Brush Pack - AG4302
Coloro Brush Pack - AG4050
Humbrol Clear 125ml - AC7431
Humbrol Enamel Thinners - AC7430
Airfx products used in this video
Pzkw VI Ausf.B 'King Tiger' Tank 1:76 - A03310
Saturn V Skylab 1:144 - A11150
Humbrol Enamel Thinner
Usage
Thinning down of solvent-based enamel paints, most commonly for airbrushing.
Substrate
Enamel paint and other Humbrol solvent based products.
Application
Brush or Airbrush.
Drying Time
Paint drying times may vary with the addition of Enamel Thinners.
How to Clean
Humbrol Enamel Thinners.
Humbrol Acrylic Thinner
Usage
Thinning down of Humbrol Acrylic paints, most commonly for airbrushing.
Substrate
Acrylic paint.
Application
Brush or airbrush.
Drying Time
Paint drying times may vary with the addition of acrylic thinners.
How to Clean
Water.
In this video we explain the uses of Humbrol Acrylic Thinners and how it improves Humbrol Acrylic paints when brushing and airbrushing.
Humbrol products used in this video
Acrylic Thinners - AC7433
Humbrol Acrylic Paint
Humbrol MattCote
Usage
A solvent-based varnish that goes on clear and dries clear, overcoming the yellowing effect associated with traditional varnishes. The product dries to a smooth, low-sheen matt finish.
Substrate
Common plastics used to manufacture model kits including polystyrene and ABS, as well as MDF. Matt cote is usually applied as the final coat to a fully painted and decaled model.
Application
Brush or airbrush. Thin suitably when airbrushing using Humbrol Enamel Thinners.
Drying Time
Surface dry in 1 hour. Fully dry after 24 hours. Drying times will vary according to ambient temperature and humidity. Recoat after 24 hours.
How to Clean
Humbrol Enamel Thinners.
In this video we show you the uses of the Humbrol Model Cotes range.
Humbrol products used in this video
Humbrol Satin Cote 28ml - AC5401
Humbrol Gloss Cote 28ml - AC5501
Humbrol Matt Cote 28ml - AC5601
Humbrol Enamel Thinners 28ml - AC7501
Humbrol Workstation - AG9156
Humbrol A4 Cutting Mat - AG9155
PZKW VI AUSF.B "King Tiger" - A03310
MINI Countryman WRC - A03414
We strongly suggest you practice the techniques using a test piece first.
Humbrol SatinCote
Usage
A solvent-based varnish that goes on clear and dries clear, overcoming the yellowing effect associated with traditional varnishes. The product dries to a smooth, satin finish.
Substrate
Common plastics used to manufacture model kits including polystyrene and ABS, as well as MDF. Matt cote is usually applied as the final coat to a fully painted and decaled model.
Application
Brush or airbrush. Thin suitably when airbrushing using Humbrol Enamel Thinners.
Drying Time
Surface dry in 1 hour. Fully dry after 24 hours. Drying times will vary according to ambient temperature and humidity. Recoat after 24 hours.
How to Clean
Humbrol Enamel Thinners.
In this video we show you the uses of the Humbrol Model Cotes range.
Humbrol products used in this video
Humbrol Satin Cote 28ml - AC5401
Humbrol Gloss Cote 28ml - AC5501
Humbrol Matt Cote 28ml - AC5601
Humbrol Enamel Thinners 28ml - AC7501
Humbrol Workstation - AG9156
Humbrol A4 Cutting Mat - AG9155
PZKW VI AUSF.B "King Tiger" - A03310
MINI Countryman WRC - A03414
We strongly suggest you practice the techniques using a test piece first.
Humbrol GlossCote
Usage
A solvent-based varnish that goes on clear and dries clear, overcoming the yellowing effect associated with traditional varnishes. The product dries to a smooth, gloss finish.
Substrate
Common plastics used to manufacture model kits including polystyrene and ABS, as well as MDF. Matt cote is usually applied as the final coat to a fully painted and decaled model.
Application
Brush or airbrush. Thin suitably when airbrushing using Humbrol Enamel Thinners.
Drying Time
Surface dry in 1 hour. Fully dry after 24 hours. Drying times will vary according to ambient temperature and humidity. Recoat after 24 hours.
How to Clean
Humbrol Enamel Thinners.
In this video we show you the uses of the Humbrol Model Cotes range.
Humbrol products used in this video
Humbrol Satin Cote 28ml - AC5401
Humbrol Gloss Cote 28ml - AC5501
Humbrol Matt Cote 28ml - AC5601
Humbrol Enamel Thinners 28ml - AC7501
Humbrol Workstation - AG9156
Humbrol A4 Cutting Mat - AG9155
PZKW VI AUSF.B "King Tiger" - A03310
MINI Countryman WRC - A03414
We strongly suggest you practice the techniques using a test piece first.
Humbrol Clear
A thin clear varnish that goes on clear and stays clear. Humbrol Clear drys to a low gloss finish, a higher gloss finish can be achieved by applying further thin coats.
Usage
A water-soluble, self leveling gloss medium that can be prepare painted surfaces for decals, as a gloss varnish and to improve the appearence of clear parts.
Substrate
Humbrol Enamel and Acrylic Paints.
Application
Apply thinly with a brush or airbrush. To achieve a high gloss finish, apply additional coats.
Drying Time
Surface dry in 30 minutes. Recoat once dry.
How to Clean
Water.
In this video we show you the uses of the new Humbrol Clear Gloss Varnish.
Humbrol products used in this video
Humbrol Clear 125ml
Humbrol Acrylic Spray Matt Varnish No.49 - AD6049
We strongly suggest you practice the techniques using a test piece first.