AC5601 Matt Model Cote - 28ml

Matt varnish is a solvent-based product supplied in a 28ml glass bottle. The polyurethane formulation goes on Clear and dries Clear, resisting the yellowing seen with traditional Enamel varnishes. It leaves a smooth, low-sheen Matt finish over Acrylic, Enamel and spray paints. Also available in Gloss and Satin.

Key Features

• Matt finish — genuinely flat, with no white misting or residue as it dries
• Polyurethane base — far more resistant to yellowing than traditional Enamel tinlet varnishes
• 28ml glass bottle — needs less thinning for airbrushing than the 14ml tinlet
• Touch-dry in 1 - 2 hours; hard-dry in 24 hours
• Goes on smooth and thin, without grain or patchiness on fine detail
• Brushes and airbrushes clean up with Enamel Thinners

Ideal For

• Sealing decalled scale models finished in Acrylic, Enamel or spray paints
• Protecting 15mm and 28mm wargames figures from handling wear, without tabletop glare
• Flattening a high-Gloss decal base coat to a true Matt finish

How to Use

Shake and stir the bottle thoroughly before use for a true flat finish. Brush straight from the bottle, or thin 2 parts product to 1 part Enamel Thinners for airbrushing. Two thin coats are preferable to one thick coat; leave at least 4 hours before handling and 24 hours before re-coating.

Warning: solvent-based. Use in a well-ventilated area. Not suitable for children under +14 Years