AD6135 Acrylic Varnish Spray - 135: Satin - 150ml
Product Info
Humbrol Acrylic Varnish Spray 135 is a solvent-based aerosol that dries Clear to a Satin finish, supplied in a 150ml can. It seals Acrylic paint and Acrylic Spray Paint against dust, moisture and handling wear. The Satin sheen sits between Gloss and Matt, keeping panel lines and surface texture visible without an unrealistic shine. Humbrol has been the modeller's standard for decades.
Key Features
- Satin finish — a natural sheen between Gloss and Matt
- Dries Clear and transparent over Acrylic paint and Acrylic Spray Paint
- Touch dry in 15 - 30 minutes; hard dry in 1 - 2 hours
- 150ml aerosol — even coverage with no airbrush needed
- Can be removed with Enamel Thinners before it dries; permanent once dry
Ideal For
- Acrylic-painted military vehicles and aircraft
- Railway rolling stock and dioramas that get handled
- Figures and animal models where a Gloss coat would look wrong
How to Use
Spray from more than 25cm using an even back and forth action. Two thin coats are preferable to one thick coat. Warning: solvent-based aerosol; use in a well-ventilated area, away from flames, and keep away from anyone under 14 years.
What's Inside
Recommended For You
Tech Specs
- Product Volume in Millilitres (If applicable)
- Metal tins 150ml
- Finish
- Satin
EN | Danger | Contains acetone. Repeated exposure may cause skin dryness or cracking. Extremely flammable aerosol. Pressurised container: May burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Avoid breathing vapours. Use only outdoors or in a well-ventilated area. Wear eye protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Call a POISON CENTER/ doctor if you feel unwell. If eye irritation persists: Get medical advice/attention. Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122°F. Dispose of contents/container in accordance with local regulations.